Detailed Product Description

1) Tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, film covered device, roll forming system, pressing equipment, post-cutting equipment. Hydraulic station, controlling system, supporter table
2) Material spec of Tile forming machine: Colored and galvanized steel sheet at yield stress 33KSI
3) Thickness of coil sheet: 0.5 - 0.6 mm
4) Coil width of Tile forming machine: 1250mm
5) Working speed of Tile forming machine: 3.0 - 4.0m/min (step distance at 380mm)

6) Power requirement of Tile forming machine:
A) Main motor power of Tile forming machine: 7.5kW
B) Hydraulic station power: 5.5kW
7) Passive uncoiler max. Capacity: 5, 000kg
8) Quantity of stands: 15 groups
9) Controlling system: PLC
10) Type of cutting: Roll-formed and length-set cutting

11) Machine dimension: About 18, 500 x 1, 500 x 1, 400mm
12) Total weight of Tile forming machine : About 9, 500kg
13) Voltage: 380V 3 phase 60Hz or at buyer's requirement14) Working flow: Decoiling the sheet-sheet guiding-film covering-roll forming-measure length -pressing-cutting the panel-panels to the supporter

Material of Main Equipment:
1. Roller Material: high grade No.45 forged steel, plated hard chrome on the surfae of roller with thickness 0.05mm
2. Active Shaft Material: high grade No.45 carbon wrought steel at diameter 75mm
3. Cutting Blade: Cr12 mould steel quenched treatment.
4. Electric Elements: Control system with PLC model S7-200, Siemins.transducer with ABB control panel with TP170, Siements. It can input 10 sets of spec at one time
5. Oil Tank Model of Hydraulic System: CB-E310